Menu
Cart 0

Gallery

D2D Accessories Customer Photo Gallery

 

D2D Cree 3.2" 40w led lighting kit wIth the Skene IQ-275 intelligent controller installed on a Suzuki by Team Moto Yamaha Nerang Queensland



D2D CREE 3.2" 35W LED Lighting Kit with the Skene IQ-275 Intelligent controller fitted to an R1200 GS WC

 

D2D Gen 7 Installation

1. Remove the OEM plug and rubber boot
2. Remove the OEM bulb 

 

3. Unscrew the heat sink from the LED bulb
by h
olding the collar and turning the heat sink
anticlockwise 

4. Place the LED bulb into the housing

5. lock down the retaining clip

6. Replace the OEM rubber boot so that the LED bulb protrudes through the rubber boot

7. Srew the heat sink back onto the bulb until 
the boot is seated properly
8. Plug the LED bulb into the voltage regulator and plug the regulator into OEM wiring loom....
That's it your done!

D2D Gen 6 Installation

1. Remove the OEM plug and rubber boot
2. Remove the OEM bulb by releasing the retaining clip

3. Remove the locating collar from the LED bulb
by h
olding the collar and turning the bulb
anticlockwise to the 11:00 position

4. Place the locating collar into the housing

5. lock down the retaining clip

6. Replace the OEM rubber boot and insert the LED bulb

7. Insert the LED bulb in the 11:00 position and push home 
and turn to the 12:00 position and ensure
the boot is seated properly
8. Plug the LED bulb into the OEM wiring loom....
That's it your done!
Low beam pattern High beam pattern

 

This KTM 990 SMT is fitted with the D2D Gen 6 H4 LED Headlight bulb, the D2D 2" Cree Triple Intensity LED Lighting Kit with the Skene IQ-175 Intelligent Controller and the Photon Blaster with the optional Alert and Turn Signal Feature mounted on the hand guards.

Headlight at low beam and Spotlights set to 10%

Headlight at high beam and Spotlights set to 100%

These pictures are of the D2D H4 LED Bulbs fitted to a Honda Prelude

For comparison only one D2D H4 fitted (RHS)

Fitted to the standard reflector with existing retainer

With both D2D H4 LED bulbs fitted

View at night on high beam  

This Triumph Sprint ST 955i is fitted with 2 D2D H4 LED Headlight replacement bulbs, Mondo Black driving lights and the Skene IQ-175 Intelligent Controller and the P3 rear visibility light system

Fitment

Low beam with Mondo's set at 10%

P3 Lights rear visibility lighting system Tail Light

P3 Lights rear visibility lighting system  Brake Light 

 Mondo Chrome Cruiser Kit with the Skene IQ-175 Intelligent Controller on a 2010 Yamaha XVS 

Mondo chrome cruiser lights at 20%

 Mondo chrome cruiser lights 


HB4/9005 LED PlugnPlay Bulb fitted to a 1996 Toyota Celica 

HB4/9005 LED PlugnPlay Bulb

White 55w Qi bulb

HB4/9005 LED Bulb fitted to low beam

Comparison between 3000 Lumen LEDs and 55w Qi bulbs

P3 LIGHTS REAR VISIBILITY LIGHTING SYSTEM

 

 D2D Super Spot Kit on a KTM 990SMT

Spots set at 10% brightness using the Skene IQ 275 Controller Supplied with the kit