Menu
Cart 0

IQ-260 P3 Dynamic Brake Lights system, Controller Only

  • $7995 USD


IQ-260 Dynamic Brake Lights system controller

Now available with a Decelerometer function!

Create Some Space - Skene Lights P3 Rear Systems provide distance between you and other drivers

Our rear lighting systems supplement your bike's existing rear lighting to maximise the visibility of your motorcycle, increasing the overall lighted footprint or your bike to traffic behind and providing redundant rear lighting in the event that a stock tail of brake light bulb fails.

The P3 Dynamic Brake Lights system adds two rows of very bright, computer-controlled LEDs to the rear of your motorcycle supplementing your bike's existing tail light, brake light and emergency flashers (TS model).

The system includes an intelligent control module, two red Photon Booster LED modules, and all necessary mounting brackets and electrical connectors. On the TS model, the LED modules also mimic the vehicle's turn signals, including 4-way flashers.

The P3 Lights system can be installed on any motorcycle and does not interfere with the vehicle's electrical system, including CANbus systems.

A unique and extremely effective feature of the P3 Lights is their exclusive conspicuity flicker that dramatically increases your bike's visibility compared to normal tail lights. The LEDs have been designed to flicker at a specific flicker rate that maximises your motorcycle's visibility to other drivers, without being distracting.

Decelerometer Function

Rear P3 systems now have a Decelerometer option! This option senses hard deceleration of the motorcycle when the rider throttles off quickly in the event of an emergency situation and initiates the P3 brake light function automatically.

There are 5 sensitivity settings to allow riders to customise to their preference or the decelerometer can be turned off with simple programming using the brake lever.

Tip Over Flasher

The controller will automatically turn on the connected lights in an emergency flashing pattern in the event that the bike tips over beyond a 65-degree angle from vertical. The flash pattern will be 3 flashes, pause, repeat. If you have the turn signal version of the controller, the 3 repeating flashes will alternate left then right. They will remain on as flashers for 15 seconds after the bike has been uprighted. The lights will no longer flash if the ignition is off, but will come back on again in Tip Over mode when the ignition is turned on unless the bike is upright.

Turn Signal Option 

The P3 Lights-TS model flashes the left and right LEDs with the bike's turn signals and 4-way flashers, making it much more apparent to the surrounding traffic that you are turning.

Voltmeter Option

The P3 Lights-TS+ model adds an integral voltmeter, allowing you to quickly and easily measure your battery voltage when you turn on your ignition. It measures the system voltage upon power up, then indicates this by flashing the LEDs accordingly: 1 flash followed by 2 flashes followed by 4 flashes would indicate 12.4 volts.

The P3 Lights rear visibility lighting system adds two rows of very bright, computer-controlled LEDs to the rear of your motorcycle supplementing your bike's existing tail light, brake light and emergency flashers (TS model).

The system includes an intelligent control module, two red Photon Booster LED modules, and all necessary mounting brackets and electrical connectors. On the TS model, the LED modules also mimic the vehicle's turn signals, including 4-way flashers.

The P3 Lights system can be installed on any motorcycle and does not interfere with the vehicle's electrical system, including CANbus systems.

A unique and extremely effective feature of the P3 Lights is their exclusive conspicuity flicker that dramatically increases your bike's visibility compared to normal tail lights. The LEDs have been designed to flicker at a specific flicker rate that maximises your motorcycle's visibility to other drivers, without being distracting.

Options Available:

Decelerometer, Turn Signal and Volt Meter features

Fully compatible with BMW CAN-bus 
Fully compatible with BMW 2-phase brake light firmware that illuminates a single filament brake light as a tail light, as used on the R1200RT and other models.

 

Expandable

In addition to powering the two included red Photon Boosters, the P3 Lights system can be expanded by connecting additional such as our Photon Booster LED modules or the bike's stock tail and brake lights. All features of the P3 Lights system will then be conferred to the attached lights. The TS model can also be expanded to support multiple Photon Boosters. These additional LED modules can be mounted on your bike's top box or side cases using our Side Case Kit.

We have designed P3 Lights so that it supplements the existing tail and brake light rather than replaces it as some other designs do. This provides three valuable benefits:

  • it increases the overall lit area visible to traffic behind you
  • it eliminates bulb-out errors caused by a change in operating current
  • it provides an important redundancy feature should either of the lighting systems fail

 

 

All our products are priced in multiple currencies, you can select your preferred currency at the top of the page.

 


We Also Recommend